Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® A3WG7 OSI bk20560 - PA66-GF35 - BASF

Material Data Center offers the following functions for Ultramid® A3WG7 OSI bk20560:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Ultramid A3WG7 OSI BK20560 is a 35% glass reinforced, pigmented black, heat stabilized, impact modified PA66 injection molding grade. It was developed to meet demanding mechanical and chemical requirements for the automotive oil pan application.
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 9500 / - MPa ISO 527
Carico unitario a rottura 180 / - MPa ISO 527
Deformazione a rottura 4 / - % ISO 527
Resistenza all'urto Charpy, +23°C 100 / - kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 104 / - kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 20 / - kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C 12.3 / - kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 240 / * °C ISO 75-1/-2
Altre Proprietàsecco/condUnitáNorma del test
Massa volumica 1380 / - kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Temperatura di fusione 280 - 290 °C -
Temperatura dello stampo 80 - 90 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet, Nero
Caratteristiche speciali
Alto urto o modificato all'urto, Stabilizzato o stabile al calore
Applicazioni
Automotive
Altre informazioni
Stampaggio ad Iniezione
PREPROCESSING
Pre/Post-processing, Pre-drying, Temperature: 80 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 280 - 290 °C
injection molding, Mold temperature, range: 80 - 90 °C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.